Engineered Material Systems In

发布：2016-08-10 16:47，更新：2022-01-08 08:01

membrane switches

product designation	description	typical application/benefit	application method	electrical resistance ohms/sq/mil
silver circuit traces
ci-1001	silver-vinyl ink, highly conductive, flexible	circuit traces / low ω, low cost	screen print	< 0.015
ci-1028	silver-polyester ink, high solids, wear resistant, fast dry	circuit traces / fine line printable, long switch actuation life	screen print	< 0.020
ci-1036	silver-urethane ink, highly conductive, highly flexible	circuit traces / lowest ω, highly creasable	screen print	< 0.010
carbon resistors, contact pads
ci-2001	carbon-vinyl ink, general purpose	top coat for silver contacts, can blend with ci-1001 to target resistance	screen print	< 20
ci-2002 series	carbon inks, stable resistance	varied resistance blends for target resistance matching	screen print	20 – 100,000
ci-2042	carbon ink, low ohm	low cost x-over, low ohm resistor	screen print	< 10
ci-5001	nickel ink, highly wear resistant for zif connectors, low ohm	zif tail contacts and jumpers, print in one pass	screen print	< 5
dielectric insulators
di-7502	dielectric, uv cure	silver trace and cross-over junction insulation, highly flexible	screen print	>1,000 mega ohms
di-7509	dielectric, uv cure	silver trace and cross-over junction insulation, moisture resistant	screen print	>1,000 mega ohms
di-7050	heat cure insulator	silver trace insulation, highly flexible	screen print	>100 mega ohms
miscellaneous
db-1501	silver epoxy, single component	smd attachments, high shear strength, long stencil life	stencil print	0.0004 ohm-cm
db-1561	silver epoxy, two component	smd attachment, low temp cure	needle dispense	0.003 ohm-cm
di-7801	uv pressure sensitive adhesive	selectively print psa, eliminate die-cut tapes	screen print	>1,000 mega ohms
di-7511	uv spacer	thick printing for spacer formation, good insulation for silver traces	screen print	>1,000 mega ohms
ci-1035	silver-polyester, adhesion and stress compatible with ito coated film.	capacitive or transparent touch switch, low temp cure	screen print	< 0.025

heaters

product designation	description	typical application/benefit	application method	electrical resistance ohms/sq/mil
silver buss bars
ci-1001	silver-vinyl ink, highly conductive, flexible	circuit traces / low ω, low cost	screen print	< 0.015
ci-1028	silver-polyester ink, high solids, wear resistant, fast dry	circuit traces / fine line printable, long switch actuation life	screen print	< 0.020
carbon resistors
ci-2002 series	carbon inks, stable resistance	varied resistance blends for target resistance matching	screen print	20 – 100,000
ci-2026 series	carbon inks, stable resistance, high temperature compatible thermoset	severe environment compatible	screen print	20 – 1000
ci-2042	low ohm stable resistance carbon heating element	low resistance heating element	screen print	< 10
dielectric insulators
di-7503	dielectric, uv cure	buss bar insulation, highly flexible	screen print	>1,000 mega ohms
miscellaneous
db-1501	silver epoxy, single component	smd attachments, high shear strength, long stencil life	stencil print	0.0004 ohm-cm
db-1561	silver epoxy, two component	smd attachment, low temp cure	needle dispense	0.003 ohm-cm
di-7801	uv pressure sensitive adhesive	selectively print psa, eliminate die-cut tapes	screen print	>1000 mega ohms

surface mount

product designation	description	typical application/benefit	application method	electrical resistance ohms - cm
silver epoxy adhesives
db-1501	silver epoxy, 1 component	smd attachments, high shear strength, long stencil life	stencil print	0.0004 ohm-cm
db-1509	silver epoxy, 2 component	smd attachments, high shear strength, long stencil life	stencil print	0.0004 ohm-cm
db-1561	silver epoxy, 2 component	smd attachment, low temp cure	needle dispense	0.003 ohm-cm
under-fill staking compounds
uf-9526	non-conductive under fill adhesive	smd attachments, long dispense life	needle dispense	> 1,000 mega ohm
encapsulant
ec-9519	non-conductive uv cure encapsulant	smd top coat for protection	needle dispense	> 1,000 mega ohm

stretchable smart fabrics

product designation	description	typical application/benefit	application method	electrical resistance ohm/sg/mil
ci-1036	highly durable, stretchable silver ink	apply to tpu film or with transfer inks for heat lamination onto fabrics	screen print	< 0.010
ci-4040	highly durable, stretchable silver/silver chloride ink	for bio-sensing on fabrics	screen print	<0.050
ci-2051	stretchable carbon ink	silver top coat or resistor	screen print	<40.0
di-7540	stretchable uv-cure insulator	protect silver or carbon tracks	screen print	> 100 mega ohms

for more information about the stretchableink package or to learn how engineered material systems can define, develop andcreate an engineered material solution that is right for your company, visit：

guang zhou city silver well tradingco.,ltd.

手机：86-，

e-mail: lai@163.com

e-mail: lai@gmail.com

其他新闻

联系方式

地址：广州市番禺区钟村镇钟荣路1号致业科技中心A栋3楼
电话：020-23830403
经理：赖先生
手机：13922125860
传真：86-020-23830433
微信：laiqiangping
QQ：598362644
Email：laiqiangping2010@163.com

产品分类

生物医学耗材

站内搜索